Icom IC-M510 Instruction Manual page 53

TRIAL MODE - Click here for more information
D Receiving a Position Request call
(May not be used, depending on the presetting)
NOTE: Even if the Auto ACK function is set to "Manual," after receiving a Distress
automatically sent to the calling station.
When a Position Request call is received:
• An alarm sounds.
•
1. Push Alarm OFF to turn OFF the alarm.
2.
Ignores the call and returns to the
Ignore
operating screen.
• The call is saved in the DSC Log.
• " " blinks continuously until you display
the call message.
Hold
Main screen.
Able
(Able to
comply)
Unable
Comply."
(Unable to
• The call is saved in the DSC Log.
Comply)
•
information, and then returns to the
operating screen by pushing
then OK .
Accepts the call.
Accept
• Displays the received call's information.
• The call is saved in the DSC Log.
Push ACK Able
Call
(p. 32)
STBY , and
or ACK Unable , then push
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
40