Table of Contents
Advertisement
working height by pressing the foot
lever at the rear of the chassis or
by pressing the up button on the
handset of the powered option.
12.4 POWERED
HEIGHT ADJUSTMENT
The powered chassis can be easily
adjusted with the push button control
handset. The seat can be height
adjusted with the client in the chair.
Before the product is used for the
first time it is recommended that the
battery should be fully charged for 12
hours. To do this plug the adaptor into
the mains socket and attach the lead
(A) to the battery and switch on the
mains supply power. When charged,
switch off mains power, remove the
adaptor plug and disconnect the
lead from the battery. The battery
charge should be topped up each
day for approximately one hour. The
chair can be adjusted in height while
connected to the mains.
Mygo Seat - Size 3 Stander User Manual p41
12.5 HEIGHT
ADJUSTMENT – HI-
LOW CHASSIS
You can carry out this adjustment
with the child in the chair. To adjust
the height of the Hi-low chassis,
press the foot lever at the rear of the
chassis, or press the up button on
the handset of the powered option
whilst holding the push handle. Once
you remove your foot from the pedal
or your thumb from the handset,
the seat will be fixed at the chosen
height.
Advertisement
Table of Contents
