Leckey Mygo Seat User Manual page 29

the backrest to position
based on the table below.
Backrest depth Size 3 (SD)
Position A 350 - 390mm / 13.8 - 15.4 inches
Position B
390 - 430mm / 15.4 - 16.9 inches
Position C 430 - 470mm / 16.9 - 18.5 inches
This backrest depth should
not be adjusted while
the child is in the seating
system.
11.5 BACKREST HEIGHT
The overall height
of the backrest
can be adjusted by
loosening the two
socket cap bolts,
then positioning
to the required
shoulder height of
the user. Once in
position the socket
cap bolts should
be retightened securely. The height
, or .
can be fine tuned when the user is in
the seat.
11.6 BACKREST ANGLE
The backrest can be angled by
loosening the bolt (A). Select the
position you require then retighten
the bolt securely. Always ensure the
back angle is secure to maintain the
desired posture for the child.
The backrest angle can be adjusted
with the child in the seat, but always
support the backrest with one hand.
Mygo Seat - Size 3 Stander User Manual p29
Use caution when adjusting
to minimum setting as
fingers could become
trapped between moving
and static parts.
Always make sure the
bolt is secure as this could
cause injury to the child
or carer.