Leckey Mygo Seat User Manual page 15

9.8 INSERTING
ATTACHMENT BOLTS
ON SANDALS
Insert the required attachment bolt
along with the retention plate
Place a rubber lid
and bottom of the sandal. Fasten
using the four screws
remove or replace the attachment
bolt, reverse this process.
on both the top
provided. To
Mygo Seat - Size 3 Stander User Manual p15
9.9 ATTACHING THE
SANDALS
Place the sandal so that the
attachment bolt goes through the
slot in the footplate. To secure, on
the underside of the footpate place
the rubber washer
the metal washer
knob onto the attachment bolt.
To position the sandals simply loosen
the knob under the footplate,
select the position you require and
re-fasten the knob.
, followed by
and then the