Table of Contents
Advertisement
p20 Mygo Seat - Size 3 Stander User Manual
9.17 INTERFACES FOR
WHEELCHAIR AND
PUSHCHAIR BASES
The set up and attachment of the
Mygo seat Size 3 to any mobility
base should be completed by a
technically competent person who
is familiar with the set up of the
mobility base.
Interface "A" attachment to 16"
wide mobility base.
The universal interface has been
designed to enable the Mygo Seat
Size 3 to be attached to any standard
16" (405mm) wide mobility base
that has been constructed from 1"
(25.4mm) side tubing.
Please refer to specific assembly
instructions supplied with your
interface for correct positioning on
your base.
The Interface plate should be fitted
by a qualified technician who is
technically competent in the set up
of the mobility base. The position
of push handles, leg hangers and
armrests on the mobility base may
need to be adjusted depending on
the size and weight of the child to
ensure the stability of the seat.
Always refer to the mobility
base manufacturer's guide
lines for correct set up,
paying particular attention
to product centre of gravity
and stability.
Users should not be
left unattended at any
time whilst using Leckey
equipment.
Advertisement
Table of Contents
