Leckey Mygo Seat User Manual page 27

Set the backrest height, seat depth
and footplate height before placing
the child in the seat. These can be
fine tuned when the child is in the
seat.
11.1 PELVIC HARNESS
To adjust the depth of the pelvic
harness, move the snap fastener to
either position
support straps to the required length.
Ensure the buckle connects securely
in the middle
outdoors and your child is wearing
a coat, position the pelvic harness
under the coat.
Always attach the pelvic
strap first before making
any other adjustments.
or . Adjust the
.
If using the seat
C
Mygo Seat - Size 3 Stander User Manual p27
11.2 PELVIC CRADLE
The Pelvic Cradle should be flat and
open when the user is placed into
the Mygo Seat - Size 3. All four side
and back buckles should be already
attached to the seat. First fasten the
buckle
Cradle. Then fasten the Velcro
the sides to fit the Pelvic Cradle to the
user. Then adjust the front and rear
straps
the user's pelvis.
B
at the front of the Pelvic
and to secure to position
at