Leckey Mygo Seat User Manual page 13

Check these regularly to
make sure the knobs are
tight, particularly if you are
moving the product unit
along corridors that may
have uneven or sloping
surfaces.
9.5 ATTACHING THE
HEADREST
To attach the head support slide the
stem into the reducing sleeve
receiving bracket. Ensure the slot in
the reducing sleeve is aligned with
the slot in the receiving bracket. Set
to the desired position and secure
using the hand lever
Seat - Size 3 has been designed
to interface with Whitmyer head
supports. The Whitmyer Lynx head
support is attached in the same
way as the Leckey headrest. To attach
Whitmyer Pro-Series head supports
remove the spacer collar
and
. The Mygo
from the
Mygo Seat - Size 3 Stander User Manual p13
receiving bracket and lock the vertical
stem in position using the ratchet
handle.