Table of Contents
Advertisement
p28 Mygo Seat - Size 3 Stander User Manual
11.3 HIP LATERALS
(with Pelvic cradle only)
To set the width of the hip guides
loosen the Allen bolts
, adjust to
the desired width and retighten.
11.4 BACKREST DEPTH
The backrest depth is adjusted by
depressing the popper then sliding
the back support tube to the desired
position. This is very important as it
will ensure the seat will fit the child,
both when they are upright and in a
recline position.
There are three
settings where
the popper can be
located.
We recommend
that you measure
the child's upper leg
length to define the
SD
required seat depth
(SD). To do this
measure from the child's lower back
to the back of their knee. Then set
Advertisement
Table of Contents
