Table of Contents
Advertisement
To attach the lateral support padded
cushions, simply slide the cushions
on with the padded side towards the
inside of the seat. Feed the plastic
buckle through the slot in the cover,
then bring the two Velcro fastener
straps around the bottom of the
moulding and attach them to the
Velcro panel as shown. Close over the
flap.
10.10 SHOULDER
SUPPORT CUSHION
(if applicable)
First loosen the shoulder support
laterals (see section 12). Slide the
cushion over the assembly and secure
using snap fasteners
10.11 CHEST HARNESS
The chest harness can be attachedby
clipping the male buckle
female buckle at either side of the
lateral supports.
10.12 KNEEPADS
Attach the kneepads with the snap
fasteners
in four places.
the sides of the upper leg supports.
Mygo Seat - Size 3 Stander User Manual p25
to the knee guides on
into the
Advertisement
Table of Contents
