Omron S82K Series Manual page 6

New S82K
90-/100-/240-W models with PFC (S82K-Pjjj24 models)
Item
Efficiency (typical)
Input Voltage
Frequency
Current 100-V input
(see (see
200-V input
note 1)
Power 100-V input
factor f
200-V input
Leak-
100-V input
age cur-
rent rent
200-V input
(see
note 1)
Inrush 100-V input
current current
(see
200-V input
note 1)
Noise filter
Output Voltage adjustment
(see note (see o e range
2) )
Ripple (see note 1)
Input variation
influence
Load variation
influence
Temperature variation
Start up time
Hold time (see note 1)
Addition- Overload protection
al func-
tion
Overvoltage
protection
Under voltage alarm
indicator
Under voltage alarm
output
Parallel operation
Note: 1. Defined with a 100% load and the rated input voltage (100 or 200 VAC)
2. The output specification is defined at the power supply output terminals.
3. When the ambient temperature exceeds 25"C, the protection function will operate at a current of 92% to 111% of the rated load
current.
4. Parallel operation is set with the Parallel/Single Operation Selector Switch.
90 W
60% to 80% (Varies depending on specifications.)
100 V (85 to 132 VAC)/200 V (170 to 264 VAC)
Selectable
50/60 Hz (47 to 63 Hz)
2.5 A max.
1.0 A max.
---
0.7 min.
0.5 mA max.
1 mA max.
25 A max.
50 A max.
Yes
!10% (V.ADJ)
2% (p-p) max.
0.5% max. (at 85 to 132 VAC/170 to 264 VAC input,
100% load)
1.5% max. (0 to 100% load)
0.05%/"C max.
200 ms max.
20 ms min.
101% to 111% of rated 105% to 160% of rated load current, inverted L drop, automatic
load current, inverted L reset
drop, automatic reset (see
note 3)
No
Yes (color: red)
Yes
Impossible Possible (2 units max.) (see note 4)
Single output
100 W
100 to 230 V (85 to 253 VAC)
4 A max.
2 A max.
0.95 min.
0.95 min.
0.5% max. (at 85 to 253 VAC input,
100% load)
1.5% max. (10 to 100% load)
1,000 ms max.
No
No
New S82K
240 W
9