Appendix C. Lcd/Keypad Module; Specifications - Rabbit RabbitCore RCM3100 User Manual

C-programmable module

Hide thumbs Also See for RabbitCore RCM3100:

Table of Contents

Distributor of Digi International: Excellent Integrated System Limited

Datasheet of 101-0533 - KIT DEV RABBIT3000/RCM3100

PPENDIX

An optional LCD/keypad is available for the Prototyping Board.

Appendix C describes the LCD/keypad module and provides the

software function calls to make full use of the LCD/keypad module.

C.1 Specifications

Two optional LCD/keypad modules—with or without a panel-mounted bezel—are available

for use with the Prototyping Board. They are shown in Figure C-1.

Only the version without the bezel can mount directly on the Prototyping Board; if you

have the version with a bezel, you will have to remove the bezel to be able to mount the

LCD/keypad module on the Prototyping Board. Either version of the LCD/keypad module

can be installed at a remote location up to 60 cm (24") away. Contact your Rabbit Semi-

conductor sales representative or your authorized Rabbit Semiconductor distributor for

further assistance in purchasing an LCD/keypad module.

User's Manual

C. LCD/K

Figure C-1. LCD/Keypad Modules Models

EYPAD

ODULE

Table of Contents

Rabbitcore rcm3110