Table of Contents
Advertisement
Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 101-0533 - KIT DEV RABBIT3000/RCM3100
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
4.5 Memory
4.5.1 SRAM
The RCM3100 can accept 128K to 512K of SRAM at U4.
4.5.2 Flash EPROM
The RCM3100 can accept 256K to 512K of flash EPROM.
NOTE: Rabbit Semiconductor recommends that any customer applications should not be
constrained by the sector size of the flash EPROM since it may be necessary to change
the sector size in the future.
Writing to arbitrary flash memory addresses at run time is also discouraged. Instead,
define a "user block" area to store persistent data. The functions
are provided for this.
readUserBlock
A Flash Memory Bank Select jumper configuration option based on 0 Ω surface-mounted
resistors exists at header JP1 on the RCM3100 RabbitCore modules. This option, used in
conjunction with some configuration macros, allows Dynamic C to compile two different
co-resident programs for the upper and lower halves of the 256K flash in such a way that
both programs start at logical address 0000. This is useful for applications that require a
resident download manager and a separate downloaded program. See Technical Note 218,
Implementing a Serial Download Manager for a 256K Flash, for details.
4.5.3 Dynamic C BIOS Source Files
The Dynamic C BIOS source files handle different standard RAM and flash EPROM sizes
automatically.
28
and
writeUserBlock
RabbitCore RCM3100
Advertisement
Table of Contents
