Mitsubishi Electric MELSEC Q Series Handbook page 223

7
REPLACEMENT OF PROGRAM
*1 The number of points for use can be changed with parameters.
*2 "V" is used for edge relays for the QCPU/QnASCPU.
*3 The format of instructions that use the accumulator for the AnSCPU/AnUSCPU/A2ASCPU is changed for the QCPU/
QnASCPU.
*4 The Q00UJCPU does not have file registers.
*5 Each 5 points of FX0 to FX4 and FY0 to FY4 can be used on the programs.
*6 The number of points that can be used on the programs.
*7 The number of accessible points to actual I/O modules.
*8 The number of I/O points of the Q02UCPU is 2048 points.
*9 For the Universal model QCPU, set the total number of points of file register, extended data register, and extended link
register with parameters.
*10 The number of device points of SFC block for the Q00UJCPU, Q00UCPU, Q01UCPU, Q02UCPU is 128 points.
*11 The number of pointer for the Q00UJCPU, Q00UCPU, Q01UCPU is 512 points.
*12 The number of Interrupt pointer for the Q00UJCPU, Q00UCPU, Q01UCPU is 128 points.
Point
Some devices and constants are not shown in the "List of applicable devices".
For details, refer to the QnUCPU User's Manual (Function Explanation, Program Fundamentals).
7
- 36