Connecting The Pc To The Analyzer - Ametek WDG-V User Manual

Connecting the PC to the Analyzer

Use the optional USB-to-RS-485 converter (PN 1000-724-JE) to connect be-
tween the analyzer and the PC.
Once the analyzer has been connected to the PC, use the PC Configurator Soft-
ware to set up parameters and calibrate the unit.
Figure 2-18.
Connecting analyzer using
USB converter and PC
Software.
PN 9000-133-VE, Rev U
For instructions on how to work in the PC Configurator Software to
configure and calibrate the analyzer, and to view analyzer status read-
ings, refer to the WDG-V PC Configurator Software User Manual.
The PC Configurator Software and the AMEVision Display User Inter-
face cannot be simultaneously connected to the analyzer.
Installation and Start-Up
|
2-37