Epilog Laser Mini Manual page 7

Procedure C: Installing the new PCB and Fan Assembly
Step 1
Locate and cut the cable tie that holds the X-Axis Air Assist Coil Tube in place. Remove and
discard the cable tie.
Step 2
Align the new PCB's mounting holes with the mounting studs on the I-beam and fasten it with the
standoffs.
Step 3
Align the Fan Assembly's mounting holes with the standoffs on the PCB. Do not fasten the fan to
the PCB yet. The Air Assist Tube will have to be moved out of the way.
Fan Assembly Upgrade
Mini / Helix
Revision Date: 2/21/2013 pg. 7 of 11