Installing Mini Pcie Module - JHCTech KMDA-2602 User Manual

2.5.2 Installing Mini PCIe Module

Step 1.Unscrew 6 screws on the left/right side.
Unscrew 6 serial copper columns on the front rear.
Unscrew the spring pad and nut of the DC-IN on the front rear.
Remove the front panel.
Rotate the bottom assembly 180° , separate the SATA cable which connected the SATA drive and
the SATA power/data connector of mother board.
Figure 2.37
Figure 2.38
28
User's Manual