Installing Mini-Pcie - JHCTech KMDA-3601 User Manual

2.5.2 Installing mini-PCIe

Step 1: Unscrew 6 screws on the underside, remove the bottom bracket;
Unscrew 2 screws on the front/rear panel;
Rotate the bottom assembly 180°, separate the SATA cable which connected the HDD/SSD with
the mother board;
Unscrew 7 screws and 10 serial copper columns on the rear panel, remove the rear panel;
Unscrew 6 screws on the front panel, remove the front panel;
Unscrew 2 screws of the internal USB;
Unscrew 2 screws on the sub-card ECB-148, remove the sub-card ECB-148;
Separate the POE power cable from the sub-card ECB-147;
Unscrew 2 screws and 2 serial copper columns on the sub-card ECB-147, remove the ECB-147;
Unscrew 4 screws on the HDD/SDD drive bay socket, remove the drive bay socket;
25
User's Manual