Table of Contents
Advertisement
User's Manual
3.4 Boot Menu
This page enables you to set the keyboard NumLock state and devices boot sequence.
Figure 3.20
Setup Prompt Timeout
This item sets the wait time for the Setup shortcut. If you do not press the Setup shortcut within the set
time, it will continue to boot.
Bootup Numlock State
This item determines if the NumLock key is active or inactive at system start-up time. The default value
is On, which is a digital lock on when the system starts. Set to Off, the keypad is in cursor control state at
startup.
Show Full Logo
This item shows the vendor logo on the startup screen.
[Enabled]: Display static LOGO screen at startup;
[Disabled]: Display self-test information at start.
Boot Option #1/#2
These items show the boot priorities.
#1 is the highest priority boot device in the boot option.
Hard Drive BBS Priorities
54
Advertisement
Table of Contents
