Table of Contents
Advertisement
User's Manual
2.1 Introduction
The following sections show the internal jumper settings and the external connectors and pin assignments
for applications.
2.2 Jumpers and connectors
The KMDA-2602 Fanless Embedded Box Computer consists of an JHC SBC (Single Board Computer)
board and an JHC subboard that is housed in an aluminum plate chassis.
Warning: Do not remove any mechanical parts until you have verified that no power is flowing within the
Embedded Box Computer. Power must be switched off and the power cord must be unplugged.
JHC SBC board Internal Diagram
Figure 2.1
8
Advertisement
Table of Contents
