2.5.3 Installing MSATA
Step 1. The step here is the same as above chapter "
For details, please refer to the above chapter "
Step 2. The step here is the same as above chapter "
For details, please refer to the above chapter "
Step 3. Hold the MSATA module with its notch aligned with the MSATA socket of the board and insert it
at a 30 degrees angle into the socket as shown in the picture.
Step 4. Screw one screw to the holder as shown in the picture.
2.5.2 Installing Mini PCIe Module
2.5.2 Installing Mini PCIe Module
2.5.2 Installing Mini PCIe Module
2.5.2 Installing Mini PCIe Module
Figure 2.55
35
User's Manual
-Step 1",
-Step 1"
-Step 2",
-Step 2"