System board switches and jumpers
CMOS clear jumper
The system board has a CMOS clear jumper (JP12, item 46 in Figure 5-2) that allows the system
configuration data in non-volatile memory to be cleared. To clear the CMOS refer to the procedure
described in Chapter 4 in the section "Clearing CMOS."
CMOS reset password jumper
The system board has a CMOS password clear jumper (JP15) that allows the CMOS password data in
non-volatile memory to be cleared.
BMC recovery jumper
The system board has a BMC recovery jumper (JP8) that allows the BMC data in the memory to be
recovered.
BMC reset Password jumper
The system board has a BMC password clear jumper (JP10) that allows the BMC password data in
non-volatile memory to be cleared.
NMI button
The system board has a Non-Maskable Interrupt (NMI) button (SW3, item 36 in Figure 5-2) that
provides a diagnostic function if the system becomes locked up or "hung." For more information refer
to the Chapter 4 section "NMI button."
CAUTION:
The NMI button is for diagnostic purposes only. Pressing this button while the server is in
normal operation will cause the system to halt immediately.
All manuals and user guides at all-guides.com
Diagnostic Tools and Setup Utilities 99