HP Proliant ML150 G6 Maintenance And Service Manual page 88

Security menu
The Security menu (Figure 4-18) allows the user to set the administrator password and the power-on
password.
The Administrator Password protection level allows the authorized user to change all settings in the
Setup Utility and configure access for system users.
If the Administrator Password is set, the Power-on Password protection level allows the authorized user
to enable or disable the requirement of entering the Administrator Password when booting the server.
Figure 4-18 Security menu
The server is shipped with no password set. To set the administrator password:
In the Security menu, select - Set Admin Password, and then press Enter.
1.
In the Enter New Password dialog box, type a new password and then press Enter (the
2.
password may consist of up to six alphanumeric characters (A-Z, a-z, 0-9).
Retype the password to verify the first entry, and then press Enter.
3.
Press F10 to close the Setup Utility.
4.
After setting the password, Setup automatically sets the selected password field to Enabled.
5.
The power-on password option (available only if the Administrator Password is set) is set by selecting
Change Power-on Password and selecting enable or disable.
All manuals and user guides at all-guides.com
Diagnostic Tools and Setup Utilities 88