Table of Contents
Advertisement
The easyCare menu item is only available with CPI
Energy and smart technology tanning devices that
are connected to an easyCare system.
EASYCARE
SETTINGS
> press ENTER
Submenu SETTINGS.
Invoked by pressing
START (ENTER).
easyCare mode only (EConly)
man. time config (T.Display)
easyCare tanning time
Adjust
Set value quicktest
Melanin min value
Melanin min runtime
EASYCARE\SETTINGS
easyCare mode only (eonly)
>
> on-US
> on
> off
If this function is active, the tanning session is strictly
carried out on the basis of the values determined by
the easyCare system. The adjustment „on-US" is
required for operation in the United States.
Factory setting: Depending on the operator country
EASYCARE\SETTINGS
man. time config (TDispl.)
>
> on
> off
If this function is active, the tanning time can be
entered at the easyCare unit. The tanning power will
be adapted automatically.
Factory setting: off
01/03
SUBMENU
EASYCARE SETTINGS
01/07
02/07
EASYCARE\SETTINGS
easyCare tanning time
>
> 8min .. . 20min
Allows for preselecting the tanning time. The
tanning power will be adapted automatically.
Factory setting: 20 min
EASYCARE\SETTINGS
Adjust
>
> 1 .. . 7
These settings must only be made by
trained service personnel!
The default setting „1" must not be
changed.
EASYCARE\SETTINGS
Set value quicktest
>
> 150.. .300
These settings must only be made by
trained service personnel!
Factory setting: 244
EASYCARE\SETTINGS
Melanin min value
>
> 0.. .400
These settings must only be made by
trained service personnel!
Factory setting: EU=0 / USA=100
M a n u a l e o p e r a t i v o | megaSun 6700 - 6800 - 6900
03/07
04/07
05/07
06/07
35
Advertisement
Table of Contents
