Led Boosters In Standby Mode; Service Menu - Basics - KBL megaSun 6900 alpha deluxe Manual

LED boosters in standby mode

In standby mode, the LED boosters work as deco-
rative lighting with minimum power. For testing and
demonstration purposes the three operating modes
can be activated via the control panel. After 10 sec-
onds, the boosters automatically switch back to the
decorative mode.

Service menu - Basics

SERVICE MENU - STANDARD OPERATING
ELEMENTS
After having entered the service CODE, the service
menu is at your disposal. Navigation is made via the
following buttons (see also chapter: Layout of the
interior control panel numbers):
• Use buttons 4 (UP) and 9 (DOWN) to browse
through the individual menu items and functions.
• Press the START/ENTER button to go to the
corresponding submenu.
• Button 2 and 7 are used to switch functions on
and off and to modify values.
• Press 3 (STORE) to save all modifications made in
all menu items.
• Press 8 (EXIT) to go back to the previous menu
level or to exit the service menu.
+/ON STORE
② ③ ④
R
E
S
E
T
RESET
⑦ ⑧
-/OFF EXIT
UP
ENTER
⑨
DOWN
SERVICE MENU - BASIC OPERATION
The service menu is divided into the main menu and
subordinate groups of functions.
If you choose a menu item, e.g. "AUDIO", you will get
access to all functions related to this item.
4
MAIN MENÜ
9
• Press the START/ENTER button to access the
desired group menu.
• The currently active function (circle) is displayed
in the centre line on the left-hand side. You can
invoke further functions of this group by pressing
4 (UP) or 9 (DOWN).
Function group
Function
Settings
M a n u a l e o p e r a t i v o | megaSun 6700 - 6800 - 6900
Select the desired
function group from
the main menu by
pressing the 4 (UP) or
the 9 (DOWN) button.
The currently selected
group is highlighted.
Group
number
4
9
23