Mode Setting - Gree XK86 Owner's Manual

6.2 Mode Setting

Under ON status, pressing "Mode" button on homepage can switch modes
circularly in the following order:
Auto -> Cool- > Dry -> Fan -> Heat -> Floor Heat -> 3D Heat -> Space Heat ->
Auto
If wired controller is connected to temperature-humidity dual-control duct type
indoor unit, modes will be switched in the following order:
Cool -> Auto Dry -> Dry Reheat -> Fan -> Heat -> Absence -> Floor Heat -> 3D
Heat->Cool
Wired Controller (XK86 and XE76-33/H)
Fig. 6.2 Interface of OFF
31