Wired Controller XK49
Note:
①
Under parameter setting status, FAN button are invalid. Press ON/OFF button
to go back to home page, but not turning on/off the unit.
②
Under parameter setting status, the signal from remote controller is invalid.
4. OPERATION INSTRUCTIONS
4.1 On/Off
Press ON/OFF button to turn on the unit.
Press ON/OFF button again to turn off the unit.
The interfaces of On/Off status are shown in fig. 4.1 and 4.2.
Fig. 4.1 Interface of On status
4.2 Mode Setting
Under On status, pressing MODE button can set mode circularly as:
Note:
①
the available modes are different for different models, the wired controller will
automatically select mode setting range according to the model of indoor unit.
②
The Auto mode can be only set at the master indoor unit.
Under Auto mode, if the indoor unit is running under Cool, the icons"
③
"
" will light up; if the indoor unit is running under Heat, the icons"
Fig. 4.2 Interface of Off status
17
" and
" and