Gree XK86 Owner's Manual page 24

(3) Stick the bottom plate of wired controller on the wall and then use screw
M4×25 to fix Soleplate and installation hole on wall together.
(4) Connect two-core twisted pair to H1 and H2 wiring column and then fix the
screws.
(5) Bundle the front panel of wired controller to its soleplate and the installation
is completed.
5.1.5 Disassembly
NOTE: Please use the flathead screwdriver to disassemble the wired controller as
shown in figure ①, in order to remove the panel and soleplate of the wired controller.
Fig. 5.12 Disassembly diagram of XE76-33/H
Fig. 5.13 Disassembly diagram of XK86
Wired Controller (XK86 and XE76-33/H)
19