Gree XK86 Owner's Manual page 32

If you select a parameter with "■" or "□" on the left, press "OK" to turn it on or
turn it off. "■" means ON while "□" means OFF. If you select a parameter with icon
" " on the left, press "OK" to enter the setting interface of the corresponding
parameter.
Press "PgDn" button to switch to the next page.
Setting Setting scope
Master Wired
ON, OFF
Controller
Master IDU ON, OFF
Use Remote ON, OFF
Prior Operation ON, OFF
High Ceiling
ON, OFF
Installation*
Wired Controller (XK86 and XE76-33/H)
Table 5.2 List of parameter settings
Default
OFF means this wired controller is a slave wired
controller. The icon of slave wired controller
"
ON
wired controller cannot set any parameter,
except switching to be a master wired controller.
After turning on this setting, the current indoor
unit will be a master indoor unit. The icon of
master indoor unit "
OFF
homepage. After turning off this setting, master
and slave status of the current indoor unit
remains unchanged.
When it is set "OFF", wired controller cannot
ON
receive signals from remote controller.
When power supply is insufficient, indoor units
set with operation priority can be turned off
OFF
manually while other units will be shut down
forcibly.
OFF Only applicable to cassette type unit
27
Remarks
" will be displayed on homepage. Slave
" will be displayed on