Schedule Setting - Gree XK86 Owner's Manual

NOTES:
① Under Dry or Auto Dry mode, low fan speed is set automatically. Fan speed
cannot be adjusted.
② Under Absence mode, auto fan speed is set automatically. Fan speed
cannot be adjusted.
③ If wired controller is connected to fresh air indoor unit, high fan speed is set
automatically. Pressing "Fan" button cannot change the fan speed.
④ If auto fan speed is set, indoor unit will change fan speed automatically
according to indoor ambient temperature.

6.5 Schedule Setting

Wired controller has two types of schedule setting: general schedule and
periodical schedule.
Press "Menu" button on homepage and then select "Schedule" to enter the
interface of schedule setting. As shown below, Schedule 1, 2, 3 refer to periodical
schedule. Periodical schedule and general schedule can be enabled at the same
time. Schedule function is turned on if "■" is displayed on the left. Schedule function is
turned off if "□" is displayed.
Wired Controller (XK86 and XE76-33/H)
35