Installing The Auto Film Feeder (Aff) - Microtek Medi-6000 Plus User Manual

Installing the Auto Film Feeder (AFF)

You can use either the Auto Film Feeder or the Feed Tray for one time with your
digitizer; therefore, before mounting the AFF onto your digitizer, make sure that
the Feed Tray has been removed out from the digitizer and the digitizer's power
is off.
Lift up the Feed Tray and
remove it from the digitizer
before installing the AFF
onto the digitizer.
Follow the steps below to install the AFF.
1. Unpack the AFF.
2. Look for two sets of the Feed Tray
Holes at both ends of the front-top of
the digitizer.
3. Insert and push down both sides of
the AFF into its compartment holes,
making sure the AFF snaps into place.
Medi-6000 Plus User's Manual 43