Microtek Medi-6000 Plus User Manual page 7

Film imaging digitizer
Hide thumbs Also See for Medi-6000 Plus:
Table of Contents

Advertisement

Do not use the digitizer near water. Never spill liquid of any kinds on the
product, or it may result in electric shock or other hazards.
This digitizer should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce
heat.
Do not store the digitizer in which it may be exposed to direct sunlight.
Using the Digitizer
Before using the digitizer, make sure the area of the front cover is clear from
any objects that may cause jams inside.
When using the digitizer, if your hairs have been jammed into the front cover
of the digitizer, turn off the power switch immediately. Do not attend to
remove your hairs from the front cover when the digitizer is still turned on.
Maintenance and
Service:
When the digitizer is going to be cleaned, ensure to turn off the power of
each device and unplug the power cable from the AC outlet.
When you need a repair service, unplug the digitizer from the power outlet
and consult qualified service personnel.
When replacement parts are required, use replacement parts that are
specified by the manufacturer or have the same characteristics as the original
parts.
For safety reasons, ensure to inspect the device before using it. In addition,
carrying out a regular inspection at least once a year.
No modification of this equipment is allowed.
WARNING
Medi-6000 Plus User's Manual
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Medi-6000 Plus and is the answer not in the manual?

Questions and answers

Table of Contents