Scanning X-Ray Film In Smart-Scan Mode - Microtek Medi-6000 Plus User Manual

Scanning X-ray Films in Smart-Scan Mode
In the Smart-Scan mode, ScanWizard Medi will automatically recognize, auto-
crop, and perform a scan of the film after the Smart-Scan button is pressed.
1. Load the film to be scanned into the Feed Tray.
2. Launch ScanWizard Medi (either as a stand-alone by clicking the program
icon on the desktop, or by using the "File-Import" or "Scan" command from
an application program).
3 Activate the Smart-Scan mode.
In the Preview window, click and hold the arrow at
the right bottom corner of the Auto Scan button; then,
choose "Smart-Scan" from its option menus.
4. Follow the procedures (steps 3 through 6) for "Scanning with Customized
Settings" in the previous section to specify your scanning requirements.
5. Click the Smart-Scan button to start scanning.
• If ScanWizard Medi is launched
as a stand-alone program, a
window "Scan To: Save As"
dialog box will appear. Click the
Save button; then, the scanned
image can be saved into your
selected folder or sent to your
selected application.
To view the scanned image,
double click the "MSmart
Images" icon on your desktop
(default folder assigned by the
software), or retrieve it from your
assigned folder.
• If ScanWizard Medi is launched as a Plug-In from an image-editing
program, the scanned image is delivered to your application, where the
image can be saved, viewed, or modified further.
Medi-6000 Plus User's Manual 35