Microtek Medi-6000 Plus User Manual page 47

4. Lower down the Top Rollers onto the
films so the films are sandwiched
between two sets of rollers (Top
Rollers and Rear Rollers).
Before start using the AFF to scan, maker sure
that the Output Tray (i.e., Output Basket) has
been installed correctly on your Medi-6000 Plus
too; otherwise, improper outputs of piles of
films may cause jams of films and bring damage
to your digitizer. Refer to the previous section
"Installing the Output Tray" for the details about
how to assemble the Output Tray onto your
Medi-6000 Plus.
Medi-6000 Plus User's Manual 47