Cleaning the Diffuser
The diffuser is used when you scan a X-ray film or transparent material. The
cleanness of the diffuser decides whether your digitizer may deal with the right
lightness of scanned transparent materials.
To clean the diffuser:
1. Push down two buttons at both sides of the front cover of the digitizer and
2. Use the same kind of cloth for cleaning the digitizer glass surface to clean
Cleaning the Rollers
Prolonged used of the digitizer may result in accumulation of ink and other residue
on the feeder's rollers, affecting their efficiency. Clean the rollers periodically to
maintain performance.
Rollers are found in two areas of the Medi-6000 Plus: Directly on the digitizer,
and on the side of the front cover.
To clean the two sets of rollers:
1. Push down two buttons at both sides of the front cover of the digitizer and
38
Medi-6000 Plus User's Manual
open the front cover.
When opening the front cover, support the both sides of the front cover with
your hands, avoiding suddenly falling down of the front cover.
the white diffuser located at the middle of the front cover.
open the front cover.
When opening the front cover, support the both sides of the front cover with
your hands, avoiding suddenly falling down of the front cover.
Need help?
Do you have a question about the Medi-6000 Plus and is the answer not in the manual?