Page 2
The IVP 3000 CF passive infrared sensor was developed by Intelbras with 100% digital technology. The IVP 3000 CF has integrated temperature sensor to offer the same detection sensitivity over a wide temperature range (from -10° to 50°) with reduced risk of false shots, protection against sabotage...
Page 3
Take all precautions necessary for the safety and protec- tion of your property. » LGPD - General Law for the Protection of Personal Data: Intelbras does not access, transfer, capture, or perform any other type of treatment of personal data from this product.
Page 5
Connect the power to terminal J1 (+12 V). Connect the zone wires to the terminal J2 (Alarm). The IVP 3000 CF does not need to be installed with an articulator, as it has a tilt angle of 15°. Its scanning angle is 115°...
Page 6
Walk slowly in front of the sensor observing if the led lights up throughout the area that needs to be protected, if necessary readjustment the position of the sensor. If the alarm panel used is Intelbras, put it in the test mode, this way it will not be necessary to observe the led, as the control panel will indicate the functioning of the sensor through siren beeps.
Page 7
8. After its useful life, the product must be delivered to an authorized Intelbras service center or directly disposed of in an environmentally appropriate manner to avoid environmental and health impacts. If you prefer, the battery, as well as other unused Intelbras brand electronics, can be disposed of at any Green Eletron collection point (waste management facility to which we are associated).
Page 8
Support via e-mail: suporte@intelbras.com.br Customer Service: 0800 7042767 Where to buy? Who installs it? 0800 7245115 Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira Rodovia BR 459, km 124, 1325 – Distrito Industrial – Santa Rita do Sapucaí/MG – 37540-000 01.21 CNPJ 82.901.000/0016-03 –...
Need help?
Do you have a question about the IVP 3000 CF and is the answer not in the manual?
Questions and answers