Page 2
Infrared sensor Congratulations, you have just purchased a product with Intelbras quality and safety. The IVP 2000 SF passive infrared sensor was developed by Intelbras with 100% di- gital technology. This sensor has SMD technology, offers efficient detection with redu- ced risk of false shots, and has automatic temperature compensation.
The IVP 2000 SF does not need to be installed with an articulator, as it already has a 12° tilt angle. The scanning angle is 90° and the range is up to 12 m. If necessary, adjust the tilt angle of the scan beam by moving the sensor plate up or down, as needed.
Caso necessite de mais tempo para testar o sensor, desligue a bateria, espere por quecedores. If the alarm panel used is Intelbras, put it in test mode. In this way, it will not be necessary to observe the LED, as the control 20 segundos e ligue a bateria novamente.
If you prefer, the battery as well as other Intelbras brand electronics without use, can be disposed of at any collection point of Green Eletron (manager of electrical and electronic waste with which we are associated). If you have any questions about the reverse logistics process, please contact us at (48) 2106-0006 or 0800 704 2767 (Monday to Friday from 8am to 8pm and Saturdays from 8 am to 6 pm) or via e-mailsuporte@intelbras.com.br.
Page 8
Support via e-mail: suporte@intelbras.com.br Customer Service: 0800 7042767 Where to buy? Who installs it? 0800 7245115 Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira Rodovia BR 459, km 124, 1325 – Distrito Industrial – Santa Rita do Sapucaí/MG – 37540-000 01.20 CNPJ 82.901.000/0016-03 –...
Need help?
Do you have a question about the IVP 2000 SF and is the answer not in the manual?
Questions and answers