Vega VEGAFLEX 82 Operating Instructions Manual page 39

Reset
Menu - Setup
Menu item
Lock adjustment
Measurement loop name
Units
Probe length
Type of medium
Application
Medium, dielectric constant
Superimposed gas phase
Dielectric constant, upper medium (TS)
Tube inner diameter
Max. adjustment - Level
Max. adjustment - Level
Min. adjustment - Level
Min. adjustment - Level
Accept adjustment of the level measurement?
Max. adjustment - Interface
Max. adjustment - Interface
VEGAFLEX 82 • Profibus PA
After a reset, certain parameter adjustments made by the user are
reset.
Note:
After this menu window, the reset process is carried out. No further
safety inquiry follows.
The following reset functions are available:
Delivery status: Restores the parameter settings at the time of ship-
ment from the factory, incl. order-specific settings. Any stored false
signal suppression or user-programmed linearisation curve, as well
as the measured value memory, are deleted.
Basic settings: Resetting of the parameter settings incl. special
parameters to the default values (presettings) of the respective instru-
ment. Any created false signal suppression or user-programmable lin-
earization curve as well as the measured value memory are deleted.
The following table shows the default values of the instrument. De-
pending on the instrument version or application, all menu items may
not be available or some may be differently assigned:
6 Set up with the display and adjustment module
Default value
Released
Sensor
Distance unit: order-specific
Temperature unit: order-specific
Länge der Messsonde factory setting
Bulk solid
Level in the metallic vessel
Granules, powder, cement / 1.5 ... 3
Yes
1.5
200 mm
100 %
Distance: 0.000 m(d) - note blocking distances
0 %
Distance: Probe length - take dead band into
account
No
100 %
Distance: 0.000 m(d) - note blocking distances
39