Vega VEGAFLEX 82 Operating Instructions Manual page 10

3 Product description
VEGACONNECT
VEGADIS 81
VEGADIS adapter
Protective cover
Flanges
Display and adjustment
module with heating
External housing
Rod components
Centering
10
The integrated Bluetooth module (optional) enables wireless adjust-
ment via standard adjustment devices.
The interface adapter VEGACONNECT enables the connection of
communication-capable instruments to the USB interface of a PC.
The VEGADIS 81 is an external display and adjustment unit for VEGA
plics sensors.
®
The VEGADIS adapter is an accessory part for sensors with double
chamber housings. It enables the connection of VEGADIS 81 to the
sensor housing via an M12 x 1 plug.
The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,
JIS B 2210-1984, GOST 12821-80.
The display and adjustment module can be optionally replaced by a
display and adjustment module with heating function.
You can use this display and adjustment module in an ambient tem-
perature range of -40 ... +70 °C.
If the standard sensor housing is too big or in case of strong vibra-
tions, an external housing can be used.
Then the sensor housing is made of stainless steel. The electronics is
located in the external housing which can be mounted in a distance of
up to 10 m (32.8 ft) to the sensor by using a connection cable.
If you are using an instrument with rod version, you can extend the
rod probe individually with curved segments and rod and cable exten-
sions of different lengths.
All extensions used must not exceed a total length of 6 m (19.7 ft).
The extensions are available in the following lengths:
Rod: ø 16 mm (0.63 in)
•
Basic segments: 20 ... 5900 mm (0.79 ... 232 in)
•
Rod/cable segments: 20 ... 5900 mm (0.79 ... 232 in)
•
Curved segments: 100 x 100 mm (3.94 ... 3.94 in)
If you mount the VEGAFLEX 82 in a bypass tube or standpipe, you
have to avoid contact to the bypass tube by using a spacer at the
probe end.
VEGAFLEX 82 • Profibus PA