Vega VEGAFLEX 82 Operating Instructions Manual page 34

6 Set up with the display and adjustment module
AI FB1 - damping
Lock/Unlock adjustment
Display
34
Level measured value min.
Measured level value max.
To damp process-dependent measured value fluctuations, you can
set a time of 0 ... 999 s in this menu item.
The damping applies to the level and interface measurement.
The default setting is a damping of 0 s.
In the menu item "Lock/unlock adjustment", you can protect the sen-
sor parameters against unauthorized or inadvertent modification. The
PIN is activated/deactivated permanently.
With active PIN, only the following adjustment functions are possible
without entering a PIN:
•
Select menu items and show data
•
Read data from the sensor into the display and adjustment module
Caution:
When the PIN is active, adjustment via PACTware/DTM as well as
other systems is also blocked.
In delivery status, the PIN is 0000.
Call our service department if you have modified and forgotten the
PIN.
6.4.2 Display
In the main menu point "Display", the individual submenu points
should be selected one after the other and provided with the correct
parameters to ensure the optimum adjustment of the display options.
The procedure is described in the following.
VEGAFLEX 82 • Profibus PA