Viewing The Wireless Network Information; Disconnecting The Wireless Network Connection; Deactivating The Wi-Fi Mode; Optional Accessories With Your Phone - Yealink Teams T55A User Manual

Procedure
1. Navigate to
> Settings > Device Settings > Wi-Fi.
2. Tap
> Add.
3. Enter the SSID and then select a security mode from the Security drop-down menu:
• If you select None, tap Save.
• If you select WEP or WPA/WPA2-PSK , enter the password and then tap Save.
• If you select 802.1×EAP, select the desired EAP method and Phase-2 authentication , enter the
desired values in the Identity, Anonymous identity, and Password fields and then tap Save.
If you enable Show advanced options, select a desired value in the Proxy field; and if you select
Manual, enter the information about the proxy server in the corresponding fields.

Viewing the Wireless Network Information

After connecting to the wireless network, you can view the wireless network information (such as wireless
status, link speed, security, IP address, signal strength, and so on.)
Procedure
1. Navigate to
> Settings > Device Settings > Wi-Fi.
2. Tap the connected wireless network.

Disconnecting the Wireless Network Connection

Procedure
1. Navigate to
> Settings > Device Settings > Wi-Fi.
2. Tap the connected wireless network.
3. Tap FORGET.
The wireless network is disconnected. You can tap it again to connect.

Deactivating the Wi-Fi Mode

You should deactivate the Wi-Fi mode when you need to connect your phone to the wired network.
Procedure
1. Navigate to
> Settings > Device Settings > Wi-Fi.
2. Turn off Wi-Fi.

Optional Accessories with Your Phone

This chapter describes the optional accessories that you can use to extend your phone's capabilities.
• Bluetooth Headset
| Optional Accessories with Your Phone | 44