Disabling Your Phone Discovery; Renaming The Paired Bluetooth Devices; Disconnecting The Bluetooth Device; Un-Pairing The Bluetooth Devices - Yealink Teams T55A User Manual

Before you begin
Make sure you have activated the Bluetooth mode.
Procedure
1. Navigate to
> Settings > Device Settings > Bluetooth.
2. Enter the desired name in the Device Name field.
Related tasks
Activating the Bluetooth Mode

Disabling Your Phone Discovery

After the Bluetooth is turned on, your phone is visible to other Bluetooth-enabled devices by default. You
can disable this feature not to allow your phone to be discovered by other Bluetooth devices.
Procedure
1. Navigate to
> Settings > Device Settings > Bluetooth.
2. Disable Open Discover.

Renaming the Paired Bluetooth Devices

You can rename the paired Bluetooth devices for better recognition.
Procedure
1. Navigate to
> Settings > Device Settings > Bluetooth.
2. Long tap the paired device and then select Details.
3. Enter the desired name in the Rename field.
4. Tap OK.

Disconnecting the Bluetooth Device

You can disconnect the Bluetooth device from your phone. After the Bluetooth device is disconnected, it
stays in the paired devices list, so that you can easily connect it to your phone next time.
Procedure
1. Navigate to
> Settings > Device Settings > Bluetooth.
2. Tap the connected Bluetooth device.
It prompts if you are sure to disconnect.
3. Tap OK.

Un-pairing the Bluetooth Devices

You can unpair your Bluetooth devices with your Teams phone. After unpaired, the Bluetooth devices
disappear from the paired devices list.
Procedure
1. Navigate to
> Settings > Device Settings > Bluetooth.
2. Long tap the paired device and then select Unpaired.
It prompts if you are sure to unpair.
3. Tap OK.
| Teams Phone Settings | 40