Connecting To The Wireless Network Using Wi-Fi Protected Setup (Wps); Adding A Wireless Network Manually - Yealink Teams T55A User Manual

Hide thumbs Also See for Teams T55A:
Table of Contents

Advertisement

Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless networks,
which can automatically configure a wireless network with a network name (SSID) and strong WPA data
encryption and authentication.
About this task
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
• Push Button Configuration (PBC): The user simply presses the WPS key on both the IP phone and
gateway/router to connect.
• Personal Identification Number (PIN): The user has to enter a PIN generated randomly by the IP
phone on the gateway/router to connect.
Connecting to the Wireless Network Using PBC
Connecting to the Wireless Network Using PIN
Connecting to the Wireless Network Using PBC
Before you begin
Make sure Wi-Fi Mode is activated.
Procedure
1. Navigate to
> Settings > Device Settings > Wi-Fi.
2. Tap
> WPS.
The phone screen prompts that you need to press the Wi-Fi Protected Setup button on your router.
3. Long press the WPS key on your gateway/router.
Once the WPS setup has completed successfully, the touch screen will prompt connect successfully.
Connecting to the Wireless Network Using PIN
Before you begin
Make sure that the Wi-Fi mode is activated.
Procedure
1. Navigate to
> Settings > Device Settings > Wi-Fi.
2. Tap
> WPS-PIN to search the available wireless network.
The phone screen prompts that you need to enter the PIN xxx on your WLAN router.
3. Log into your gateway/router's web interface, and configure it to search the clients.
Once the WPS-PIN setup completes successfully, the web interface of the gateway/router will prompt
success.

Adding a Wireless Network manually

If your gateway/router has SSID broadcast disabled, it might not appear in the scanning results. In that
case, you must manually add a wireless network.
Before you begin
Make sure Wi-Fi Mode is activated.
| Wireless Network | 43

Advertisement

Table of Contents
loading

Table of Contents