Table of Contents
Advertisement
FAULT
E:27 lights up.
Another error code ap-
pears on the display.
E:01 to E:30
Washing results
FAULT
Tableware is not dry.
CAUSE
Mains voltage is too
low.
A technical fault is
present.
CAUSE
The selected rinse aid
is not suitable or has
been used too spar-
ingly.
Programme or pro-
gramme option has no
drying phase, or the
drying phase is too
brief.
Water collects in re-
cesses of the tableware
or cutlery.
TROUBLESHOOTING
This is not a fault on the appli-
ance.
Contact an electrician.
1.
Have the mains voltage and
2.
electrical installation
checked by an electrician.
Press
.
1.
Unplug the appliance or
2.
switch off the fuse.
Wait at least 2 minutes.
3.
Insert the mains plug of the
4.
appliance in a socket or
switch on the fuse.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press
.
●
Turn off the water tap.
●
Pull out the mains plug.
●
Contact Customer Ser-
●
vice and give the error
code.
TROUBLESHOOTING
Add Rinse aid → Page 30.
1.
Set the amount of rinse aid
2.
to be dispensed.
Select a programme with
●
drying, e.g. intensive, strong
or ECO programme.
Some option buttons de-
crease the drying result, e.g
varioSpeed.
Position tableware at an
●
angle where possible.
46
Advertisement
Table of Contents
