Washing Programmes - IKEA RENLIG DW45 Owner's Manual

ENGLISH
– To set the water softener level.
– To deactivate/activate the audible signals.
If a programme indicator light is on, cancel
the programme to go back to the setting
mode. Refer to the chapter "Setting and start-
ing a washing programme".
Programme indicator lights A and B
Apart the selection of the corresponding wash-
ing programme, these lights have an auxili-
ary functions:
• The adjustment of the water softener level.
• Deactivation/activation of the audible sig-
nals.
Audible signals
You can hear an audible signal:
• At the end of the washing programme.
• When the appliance has a malfunction.
The activation of the audible signals is set at
the factory.
Do these steps to deactivate the audible sig-
nals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.

Washing programmes

Washing programmes
Programme
Intensive
Normal
1)
Quick
Degree of Type of
soil load
Crockery,
cutlery,
Heavy soil
pots and
pans
Crockery,
Normal cutlery,
soil pots and
pans
Normal or Crockery
light soil and cutlery
3. Press and hold the programme selection/
cancel button until programme indicator
light A flashes and programme indicator
light B comes on.
4. Press the programme selection/cancel
button again.
– Programme indicator light A comes on.
– Programme indicator light B starts to
flash.
5. Wait until programme indicator light A
goes off.
– Programme indicator light B continues
to flash.
– The end indicator light comes on.
The audible signals are activated.
6. Press the programme selection/cancel
button again.
– The end indicator light goes off.
The audible signals are deactivated.
7. Switch off the appliance to save the oper-
ation.
Do these steps to activate the audible signals:
1. Do the above procedure until the end in-
dicator light comes on.
Programme description
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
Prewash
Main wash up to 65°C
2 intermediate rinses
Final rinse
Drying
Main wash up to 60°C
Final rinse
7