Table of Contents
Advertisement
FAULT
Tableware is not dry.
Plastic tableware is not
dry.
Cutlery is not dry.
CAUSE
The combined deter-
gent used has a poor
drying performance.
Extra Dry not activated
to improve drying per-
formance.
Tableware removed
too early or drying pro-
cess not yet ended.
Rinse aid used has a
limited drying perform-
ance.
Not a fault. As plastic
does not store heat so
well, it also does not
dry as well.
Cutlery not arranged
properly in the cutlery
basket or cutlery
drawer.
TROUBLESHOOTING
Use rinse aid to improve dry-
1.
ing performance.
Use a different combined de-
2.
tergent with a better drying
performance.
Activate Extra Dry.
●
Wait until the programme
1.
ends.
Only remove tableware
2.
30 minutes after the pro-
gramme has ended.
Use a name-brand rinse aid.
●
Eco products may have lim-
ited effectiveness.
No remedial action possible.
●
Arrange the cutlery properly.
1.
→ "Arrange tableware",
Page 35
Arrange cutlery individually
2.
where possible.
Avoid points of contact.
3.
47
Advertisement
Table of Contents
