Table of Contents
Advertisement
FAULT
Appliance interior still
wet after wash cycle.
Remnants of food on
tableware.
CAUSE
Not a fault. The con-
densation drying prin-
ciple causes water
droplets in the tub –
they are indeed desir-
able here. The mois-
ture in the air con-
denses on the inside
walls, runs off and is
pumped out.
Tableware was placed
too close together.
Basket is overfilled.
Spray arm rotation is
blocked.
Spray arm nozzles are
blocked.
Filters are soiled.
Filters are inserted in-
correctly and/or not
engaged.
Washing programme
selected too weak.
Tableware has been
precleaned too in-
tensely. The sensors
chose a weaker pro-
TROUBLESHOOTING
No action required.
Arrange tableware with suffi-
1.
cient space in between.
The spray jets must reach
the surfaces of the table-
ware.
Avoid points of contact.
2.
Arrange tableware with suffi-
1.
cient space in between.
The spray jets must reach
the surfaces of the table-
ware.
Avoid points of contact.
2.
Arrange tableware so that it
●
does not obstruct spray arm
rotation.
Clean the Spray arms
●
→ Page 43.
Clean the filters.
●
→ "Cleaning filters", Page 42
Insert the filters properly.
1.
→ "Filter system", Page 42
Engage the filters.
2.
Select a more intensive
●
washing programme.
Adjust the sensitivity of the
●
sensors.
Only remove large remnants
●
of food and do not prerinse
tableware.
48
Advertisement
Table of Contents
