Washing Results - IKEA PROFFSIG Manual

FAULT
E:25 lights up.
E:27 lights up.
Another error code ap-
pears on the display.
E:01 to E:30

Washing results

FAULT
Tableware is not dry.
CAUSE
Wastewater pump is
blocked.
Cover of the wastewa-
ter pump is loose
Mains voltage is too
low.
A technical fault is
present.
CAUSE
The selected rinse aid
is not suitable or has
been used too spar-
ingly.
Programme or pro-
gramme option has no
drying phase, or the
drying phase is too
brief.
TROUBLESHOOTING
Clean the wastewater pump.
●
→ "Clean wastewater pump",
Page 57
Secure the cover of the
●
Wastewater pump
→ Page 57 so it clicks into
position.
This is not a fault on the appli-
ance.
Contact an electrician.
1.
Have the mains voltage and
2.
electrical installation
checked by an electrician.
Press .
1.
Unplug the appliance or
2.
switch off the fuse.
Wait at least 2 minutes.
3.
Insert the mains plug of the
4.
appliance in a socket or
switch on the fuse.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press ⁠ .
●
Turn off the water tap.
●
Pull out the mains plug.
●
Contact Customer Ser-
●
vice and give the error
code.
TROUBLESHOOTING
Add Rinse aid → Page 29.
1.
Set the amount of rinse aid
2.
to be dispensed.
Select a programme with
●
drying, e.g. intensive, strong
or ECO programme.
46