Preventing Material Damage; Safe Installation; Safe Use - IKEA DISKAD Manual

Hide thumbs Also See for DISKAD:
Table of Contents

Advertisement

Preventing material damage

Preventing material damage
Follow these instructions to prevent ma-
terial damage to your appliance, ac-
cessories or other objects in your kit-
chen.

Safe installation

Follow the instructions when installing
the appliance.
ATTENTION!
Improper installation of the appli-
ance may cause damage.
If the dishwasher is installed
above or below other domestic ap-
pliances, follow the information on
installation in combination with a
dishwasher in the installation in-
structions for the individual appli-
ances.
If there is no information or if the
installation instructions do not in-
clude the relevant information,
contact the manufacturer of these
appliances to check that the dish-
washer can be installed above or
below these appliances.
If no information is available from
the manufacturer, the dishwasher
should not be installed above or
below such appliances.
To ensure the safe operation of all
domestic appliances, continue fol-
lowing the installation instructions
for the dishwasher.
Do not install the dishwasher un-
der a hob.
Do not install the dishwasher near
heat sources, e.g. radiators, heat
storage tanks, ovens or other ap-
pliances that generate heat.
Modified or damaged water hoses
may result in material damage and
damage to the appliance.
Never kink, crush, modify or cut
through water hoses.
Only use the water hoses supplied
with the appliance or genuine
spare hoses.
Never re-use water hoses that
have been used before.
If the water pressure is too high or
too low, this may impair functioning
of the appliance.
Make sure that the water pressure
in the water supply system is min.
50 kPa (0,5 bar) and max. 1000 kPa
(10 bar).
If the water pressure exceeds the
maximum value specified, a pres-
sure-reducing valve must be in-
stalled between the drinking water
connection and the hose set of the
appliance.

Safe use

Follow the instructions when using the
appliance.
ATTENTION!
Escaping water vapour can damage
fitted units.
When the programme ends, leave
the appliance to cool down for a
while before opening the door.
Special salt can damage the tub due
to corrosion.
To make sure that any special salt
that escapes is washed out of the
tub, add the special salt to the dis-
penser for special salt immediately
before the programme starts.
Detergent may damage the water
softening system.
12

Advertisement

Table of Contents
loading

Table of Contents