Mechanical Damage - IKEA DISKAD Manual

FAULT
Appliance cannot be
switched on or oper-
ated.
Appliance does not
start.
Programme starts
automatically.
Appliance stops during
the programme or cuts
out.

Mechanical damage

FAULT
Appliance door cannot
be closed.
CAUSE
Appliance functions
have failed.
The mains fuse has
tripped.
Mains cable is not in-
serted.
Appliance door is not
closed properly.
You did not wait until
programme ended.
Appliance door is not
closed properly.
Power and/or water
supply has been inter-
rupted.
Top basket is pressing
against inner door and
preventing appliance
door from being closed
securely.
CAUSE
Door lock has been ac-
tivated.
TROUBLESHOOTING
Pull out the mains plug or
1.
switch off the fuse.
Wait at least 2 minutes.
2.
Connect the appliance to the
3.
power supply.
Switch the appliance on.
4.
Check the relevant fuse.
●
Check whether the socket
1.
works.
Check whether the mains
2.
cable is properly inserted in
the socket and on the rear of
the appliance.
Close the appliance door.
●
→ "Terminate programme",
●
Page 37
Close the appliance door.
●
Check the power supply.
1.
Check the water supply.
2.
Check whether the rear
●
panel of the appliance is be-
ing pressed in by a socket or
hose holder that has not
been removed.
Arrange the tableware so
●
that no parts project beyond
the basket and prevent the
appliance door from closing
properly.
TROUBLESHOOTING
Close the appliance door
●
with greater force.
55