Maintenance Instructions; Troubleshooting - DAVIS Wireless Temperature/Humidity Station Instruction Manual

Maintenance Instructions

Keep the surfaces clean. The station is less effective when the surfaces are
dirty. Remove dust from the solar panel and the screen with a damp cloth.
Remove any debris that obstructs air flow between the radiation shield
parts e.g., leaves, twigs, webs, and nests.
Avoid spraying insecticide of any kind into the radiation shield as this may
damage the sensors and the shield.
Once a year: replace the motor (Part # 7758 (standard motor) or # 7759
(low-current motor)), replace the batteries, and remove any debris lodged
inside the unit.
Replacing Fan Batteries
1. Retrieve your station and place on a stable work surface.
2. Disassemble the station (See page 3).
3. Replace the old batteries (See page 8).
4. Re-assemble the station (See page 8).
5. Mount the Aspirated Temp/Hum Station in its location.

Troubleshooting

If you are experiencing problems with your Aspirated Temp/Hum Station, first
be sure to check all cable connections. If you are unable to solve the problem,
please call Davis Technical Support. We'll be glad to help. Most questions can be
answered while you're on the phone. You can also email us for support, or visit
our website. Sorry, we are unable to accept collect calls.
Note: Please do not return items to the factory for repair without prior authorization.
Contacting Davis Technical Support
(510) 732-7814 for Technical Support, Monday – Friday, 7:00 a.m. – 5:30 p.m.
Pacific Time.
(510) 670-0589 Fax to Technical Support or Customer Service.
support@davisnet.com E-mail to Technical Support.
www.davisnet.com Copies of User Manuals are available on the "Support"
page. Watch for FAQs and other updates. Subscribe to the e-newsletter.
Page 14 Wireless Temperature/Humidity Station